Recruiting Funnel: Stages, Conversion Rates, Calculation

November 21, 2026
By Jürgen Ulbrich

A recruiting funnel (also recruitment funnel or hiring funnel) is the sequence of stages from first contact to hire, with the number of people left at each stage. It shows how many people must enter at the top to make one hire and which stage loses the most. Multiply the stage conversion rates to get the share who end up hired; divide your planned hires by it to get the contacts you need.

At a glance
Definition: People per stage, from first contact to hire — conversion between stages tells you where to work, the top of the funnel is rarely the answer
Formula: Needed at top = hires ÷ (rate 1 × rate 2 × …) — worked example with assumptions marked
Reference: 4 of 16 applications suitable, 69.3 % of offers accepted — IAB Germany 2025, NACE US 2022; use as a sanity check, not a target
Where it leaks: Between interview and offer — slow feedback and late offers lose people who were already won
As of November 2026

What are the stages of a recruiting funnel?

The names differ, the logic is stable. Write the stages down for your own process and count people at each:

StageCountsConversion to next stage
1. ReachedAd views or people contactedClick or reply rate
2. Applied or replied with interestApplications, interested repliesShare passing the first screening
3. ScreenedPeople checked against the must-havesShare invited to interview
4. InterviewedPeople who had at least one interviewShare receiving an offer
5. OfferOffers madeOffer acceptance rate
6. HiredSigned contracts–

There are two entry doors, and they behave differently: inbound (people apply) and outbound (you contact people). Count them in separate funnels, otherwise a good inbound number hides a weak outbound one. The sourcing side is detailed in the sourcing funnel from search to booked meeting.

How do you calculate the funnel? A worked example

Required contacts = planned hires ÷ (conversion 1 × conversion 2 × …). The rates below are assumptions for illustration, not benchmarks.

  • Goal: 5 hires in a quarter for one role family, outbound.
  • Assumed rates: 20 % reply, 50 % of repliers interested, 60 % of those pass the screening, 40 % of screened get an interview, 35 % of interviewed get an offer, 80 % accept an offer.
  • Interested replies per contact: 0.20 × 0.50 = 10 %. Passing the screening: × 0.60 = 6 %. Interviewed: × 0.40 = 2.4 %. Offer: × 0.35 = 0.84 %. Hired: × 0.80 = 0.67 %.
  • 5 hires ÷ 0.0067 = about 750 contacts, roughly 58 per week over 13 weeks.

Now see what moves the result: raising the reply rate from 20 % to 30 % cuts the contacts to 500. Raising offer acceptance from 80 % to 90 % saves about 85 contacts. Fixing the weakest stage is almost always cheaper than adding more at the top.

What are typical recruiting funnel conversion rates?

Treat published rates as a sanity check, not as a target: definitions of the stages and the type of employer differ a lot. Two neutral reference points exist. In Germany, the IAB vacancy survey (published 3 September 2026) counted 16 applications per regular hire in 2025, of which employers judged about 4 (28 %) suitable; for specialist and expert roles the suitable share was 23 %. In the US, the National Association of Colleges and Employers reported an interview-to-offer rate of 47.5 % and an offer-to-acceptance rate of 69.3 % (November 2022, method not stated). A sourced professional role looks different, and so will yours.

The better benchmark is your own last four quarters, per role family and per entry door. Use outside numbers only to see whether you are far off.

Where does a recruiting funnel leak?

  1. Top to screening: too many unqualified applicants. The ad and the must-haves are unclear. Fix the profile, not the volume.
  2. Screening to interview: slow first answer. People who hear nothing for a week apply elsewhere. Fast first answers are the cheapest lever at this stage.
  3. Interview to offer: waiting for the manager. A feedback deadline of 48 hours is the cheapest fix, see reducing time to hire.
  4. Offer to hire: late or low offers. Track declined offers with the reason.
  5. Quality of the top itself. In an own test (Sprad, 15 August 2026, three roles, 218 profiles, each system's own hits excluded, method at sourcing benchmark), coverage of the matching people was 38 % for Sprad's search against 9 % for the best of four other tools. It is one test by a vendor, so read it as a hint that search quality, not only contact volume, changes the first rates in your funnel.

How do you use the funnel in practice?

  • Count people per stage and per door at the end of every month. A spreadsheet is enough.
  • Mark the stage with the lowest rate against your own history; work on that one for a quarter.
  • Do not report one overall conversion; it hides which stage changed. Which numbers are worth steering by is covered in recruiting KPIs that tell you something.
  • Keep people who drop out in your pool with the stage and reason, so the next role starts with names. In Germany that needs a legal basis, usually consent (Art. 6 GDPR), and the recorded reason must not touch a protected trait (§ 7 AGG).

When you count for the first time, look hardest at the stages after the interview: that is where few teams measure, while the budget goes to the top.

How does Sprad support the funnel?

Sprad is a vendor of this kind of software, so read this with that in mind. It touches the early stages: Active Sourcing searches public profiles and your own network by requirement and checks every profile against your criteria, with outreach from one inbox; Screening checks CVs and can run a voice interview in 12 languages (30 credits; CV check 2 credits), which shortens the wait between application and first conversation. The Talent Network keeps drop-outs for the next role. Prices are on the pricing page. Sprad does not replace interviews or offers, and it does not report your funnel automatically; the counts above you keep in your ATS or a sheet.

sprad.io/talent-network
Sprad Talent Network: list, board and saved views of everyone your company already knows
Source: sprad.io/talent-network, as of November 2026

FAQ

What is a recruiting funnel?

The stages from first contact to hire with the number of people left at each stage and the conversion between them.

How do I calculate how many candidates I need?

Divide planned hires by the product of your stage conversion rates, as in the example above: 5 hires at 0.67 % need about 750 contacts.

What is a good conversion rate in recruiting?

There is no universal figure. In Germany about 4 of 16 applications per hire were suitable in 2025 (IAB), and NACE reported 69.3 % of offers accepted in 2022; compare yourself with your own history first.

What is the difference between a recruiting funnel and a recruiting pipeline?

The funnel counts people per stage for a given hiring effort. A talent pipeline is the group of people you prepare before a role opens.

Which stage should I fix first?

The one with the lowest rate compared with your own history, often the step after the interview.

Jürgen Ulbrich

CEO & Co-Founder of Sprad

Jürgen Ulbrich has more than a decade of experience in developing and leading high-performing teams and companies. As an expert in employee referral programs as well as feedback and performance processes, Jürgen has helped over 100 organizations optimize their talent acquisition and development strategies.

Free Templates &Downloads

Become part of the community in just 26 seconds and get free access to over 100 resources, templates, and guides.

No items found.

The People Powered HR Community is for HR professionals who put people at the center of their HR and recruiting work. Together, let’s turn our shared conviction into a movement that transforms the world of HR.